Canon PowerShot G1 X Mark II User Guide - Page 194
Unscrew the standard grip., Remove the grip., Attach the custom grip.
View all Canon PowerShot G1 X Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
*4 Can be configured when [Flash Mode] is [Manual]. Linked to settings on the flash unit. *5 1/64 for Speedlite 430EX II/430EX/320EX/270EX II/270EX. *6 For options other than On/Off, configure the setting on the flash unit itself. Not available with Speedlite 430EX II/320EX/270EX II/270EX. When this item is set to [On], [Shutter Sync.] cannot be set to [2nd-curtain]. (If [Shutter Sync.] is set to [2ndcurtain], it will be changed to [1st-curtain].) *7 Can only be configured when [Flash Mode] is [Auto]. *8 Restores all default settings. You can also restore defaults for [Slow Synchro], [Safety FE], [Red-Eye Corr.], and [Red-Eye Lamp] by using [Reset All] on the [3] tab on the camera (=178). • In [ ] shooting mode, icons representing Smiling, Sleeping, Babies (Smiling), Babies (Sleeping), and Children shooting scenes determined by the camera are not displayed, and the camera does not shoot continuously (= 36). Replacing the Grip The standard grip can be replaced with a custom grip (sold separately). 1 Unscrew the standard grip. zzUse the tool included with the custom grip to remove both screws. zzKeep the screws in a convenient place to avoid losing them. If the screws are lost, you can use the spare screws included with the accessory. 2 Remove the grip. zzSlide the grip sideways to remove it. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, M, C1, and C2 Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix 3 Attach the custom grip. zzSlide the grip tabs into the grooves on the camera as you attach the grip. Index 194