Canon PowerShot G1 X Mark II User Guide - Page 96

Flash Changing the Flash Mode Still Images You can change the flash mode to match the shooting scene. For details on the flash range, see "Flash Range" (=230). 1 Raise the flash. zzMove the switch. 2 Configure the settings. zzPress the button, choose a flash mode (either press the buttons or turn the dial), and then press the button. zzThe option you configured is now displayed. • The setting screen cannot be accessed by pressing the button when the flash is lowered. Move the switch to raise the flash, then configure the setting. • If the flash fires, vignetting may occur. [ ] Auto Fires automatically in low-light conditions. [h] On Fires for each shot. [Z] Slow Synchro Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range. • In [Z] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (=99). • In [Z] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing. [!] Off For shooting without the flash. • If a blinking [ ] icon is displayed when you press the shutter button halfway in camera-shake inducing, low-light conditions, mount the camera on a tripod or take other measures to keep it still. • Adjustment is also possible by pressing the button, touching the desired option, and then touching it again. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, M, C1, and C2 Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 96