Canon REALiS LCOS WUX500ST WUX500ST Users Manual - Page 114
Network settings, Network Connection Overview, Connection Methods, Wired Networks
![]() |
View all Canon REALiS LCOS WUX500ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Menu Description Network settings Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be necessary. The following is an explanation of preparation on the computer side. Connection Methods The projector can be connected to a wired network with a LAN cable or to a wireless network via Wi-Fi. Wired Networks To connect the projector to a wired computer network, use a LAN cable. The LAN cable can be connected to either the LAN port or HDBaseT port. When using the LAN port, connect the projector as follows. Hub or router, etc. LAN cable (shielded twisted pair; not included) Projector LAN terminal When using the HDBaseT port, connect the projector as follows. LAN cable (CAT5e or better, shielded-compatible; sold separately) HDBaseT transmitter LAN cable (CAT5e or better, shielded-compatible; sold separately) HDBaseT port • The LAN port and HDBaseT port cannot be used at the same time for a network connection. • The HDBaseT port provides a maximum transfer speed of 100 Mbps. Note that PC-free multi projection is not available. • Select which port to use in [Communication settings] > [Wired network] (P107). 114
![](/manual_guide/products/canon-realis-lcos-wux500st-wux500st-users-manual-354a4cc/114.png)