Canon REALiS LCOS WUX500ST WUX500ST Users Manual - Page 189
ANALOG PC-2 / COMPONENT Terminal, Service Port (CONTROL), Mini D-sub 15-pin, Pin assignment
![]() |
View all Canon REALiS LCOS WUX500ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Product Specifications ■ ANALOG PC-2 / COMPONENT Terminal This terminal is used as a computer ANALOG PC input or COMPONENT terminal. Use a D-sub computer cable. The terminal specifications for the ANALOG PC input and COMPONENT input are the same. Mini D-sub 15-pin Pin No. 1R Signal 2G 3B 4 OPEN 5 Ground (Horizontal sync.) 6 Ground (R) 7 Ground (G) 8 Ground (B) Pin No. Signal 9 +5 V power 10 Ground (Vertical sync.) 11 Ground 12 DDC data 13 Horizontal sync. 14 Vertical sync. 15 DDC clock ■ Service Port (CONTROL) Pin assignment Pin No. Signal 1 OPEN 2 RxD 3 TxD 4 OPEN 5 GND 6 OPEN 7 Internal pull-up 8 OPEN 9 OPEN Communication format Communication mode : RS-232C, asynchronous, half-duplex communication Communication speed : 19200bps Character length : 8 bits Stop bits Parity : Settable to 1 bit or 2 bits. Factory default state is 2 bits. : None Flow control : None The service port is not available when [HDBaseT] is set to [On] and [Serial communication] is set to [HDBaseT]. Other Information Product Specifications 189
![](/manual_guide/products/canon-realis-lcos-wux500st-wux500st-users-manual-354a4cc/189.png)