Canon REALiS LCOS WUX500ST WUX500ST Users Manual - Page 97
Vertical projection, Edge blending
![]() |
View all Canon REALiS LCOS WUX500ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Menu Description Incorrect settings may shorten the useful life of the lamp or other parts. Vertical projection You can ensure adequate cooling by switching the fan mode to suit upward- or downwardfacing installations. Option Function Off Does not alter the fan mode. Upward Setting for use when the projector faces upward. Downward Setting for downward projection. • Be sure to perform this setting to use vertical projection. • Projecting vertically without using this setting will shorten the useful life of the lamp and other parts. • Even if you complete this setting, vertical projection will result in a shorter useful life of the lamp and other parts than horizontal projection. Edge blending Brightness and colors of overlapping edges of images from multiple projectors, which form a blending area, can be adjusted for a more seamless appearance. For detailed instructions, see "Projecting from Multiple Projectors at Once (Edge Blending)" (P163). [Off] Disable blending. [Adjust] Display the menu for blending area adjustment. Start marker End marker Blending area When adjusting the image projected from the right side • Adjustment may not eliminate different colors or brightnesses in the blending area. • For best edge-blending results, use all projectors in the same image mode and make the following adjustments. (1) Brightness, contrast, R/G/B gain and offset, black level, blending color, color temperature, color level, color balance, sharpness, and gamma (P88) (2) Color adjustment, by using 6-axis color adjustment (P91) (3) Gamma adjustment, by fine-tuning gamma (P91) (4) Corner adjustment, using keystone correction (P59) Advanced Guide Menu Description 97
![](/manual_guide/products/canon-realis-lcos-wux500st-wux500st-users-manual-354a4cc/97.png)