Canon REALiS LCOS WUX500ST WUX500ST Users Manual - Page 145

Menu Description Setting PJLink [PJLink] From [PJLink] in the settings screen, you can set the PJLink functions which are the standard for projector management on a network. For the setting procedure, refer to "Network Setting" (P135). For information about PJLink, refer to "What is PJLink?" (P128). Advanced Guide Menu Description Item PJLink PJLink authentication Password Confirm password Explanation Turn the PJLink function on or off. If OFF is selected, the PJLink function will be turned off and the other settings in this screen cannot be changed. Select whether to turn the PJLink authentication function on or off. The following settings cannot be changed when this setting is [OFF]. [Password] [Confirm password] Enter the PJLink authentication password in 1-byte alphanumeric characters (1 - 32 characters). For confirmation, enter the same password that you entered in [Password]. Factory default setting ON ON system system Setting Up a Controller Manufactured by Crestron Electronics [Crestron Controller] The [Crestron e-Control] screen will open. For details on the Crestron Controller, visit the Crestron website. http://www.crestron.com/ 145