Canon REALiS LCOS WUX500ST WUX500ST Users Manual - Page 92
Lamp mode, Reset, Image priority
View all Canon REALiS LCOS WUX500ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Menu Description • Adjustment to settings other than [Ambient light] is stored as setting values for the current input signal and image mode. • Image resolution may seem lower when noise reduction is applied. Lamp mode > [Image adjustment] > [Lamp mode] Reducing the lamp brightness reduces power consumption and cooling fan noise. It can also be displayed by pressing the ECO button on the remote control. Option Full power Power saver Function Projects images at full brightness. Reduces lamp brightness to save energy. Reset > [Image adjustment] > [Reset] Restore the current image quality settings to the factory defaults. Option OK Cancel Function Resets the image adjustment settings. Cancels resetting of the image adjustment settings. • Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will restore the settings originally saved for that user profile. • Only the setting for the combination of input signal and image mode for the current projection is reset. Image priority > [Image adjustment] > [Image priority] Select which side image adjustment settings to apply in split-screen mode. Option Primary Secondary Function Use the side with control rights as the [Primary] side. For image adjustment settings that are not configured separately, [Primary] side settings apply to both sides. Not available when the [Primary] side has control rights. To reverse the side given priority for image adjustment (whether on the left or right side), switch control rights to the other side and change [Secondary] to [Primary]. • Can be independently configured Brightness (P88), Contrast (P88), Gamma (P88), Color adjustment (P88), Fine-Tune Gamma (P91) • [Primary] setting also applies to [Secondary] Image mode (P87), Advanced adjustment except Fine-Tune Gamma (P89 - P91), Lamp mode (P92) 92