Canon REALiS LCOS WUX500ST WUX500ST Users Manual - Page 141

Menu Description Setting Up Email [Mail] From [Mail] in the settings screen, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to "Network Setting" (P135). Advanced Guide Menu Description Item To: Cc: From: SMTP server IP address SMTP server port number SNTP server IP address Time zone Mail resend interval* Mail resend times Error report Explanation Factory default setting Enter the recipient address for error mails MailUserAccount in 1-byte alphanumeric characters and symbols (1 - 63 characters). Enter the CC address for error mails in 1- byte alphanumeric characters and symbols (1 - 63 characters). Enter the sender address for error mails [email protected] in 1-byte alphanumeric characters and symbols (1 - 63 characters). Enter the SMTP server IP address in 1- 0.0.0.0 byte numbers. Enter the SMTP server port number in 1- 25 byte numbers (1 - 65535). Enter the SNTP server IP address in 1- 0.0.0.0 byte numbers. Select the time zone where the projector is used. (GMT) Dublin, Lisbon, London Enter the interval for resending mail 10 when an error occurred (unit: seconds) within the range of 0 - 59 seconds using 1-byte numbers. Enter the number of times to resend 3 mail when an error occurred within the range of 0 - 255 using 1-byte numbers. Select whether to turn the error mail sending function on or off. OFF * When the interval is set to 0 seconds, repeated attempts to send mail are made (as set in [Mail resend times]) without pausing between attempts. 141