Canon REALiS LCOS WUX500ST WUX500ST Users Manual - Page 139

Menu Description Basic Wireless Network Settings [Wireless] From [Wireless] on the settings screen, you can complete basic network information for wireless connections. For the setting procedure, refer to "Network Setting" (P135). Advanced Guide Menu Description Item MAC address DHCP IP address Subnet mask Default gateway Wi-Fi Protected Setup Mode Select SSID Security Explanation Factory default setting Shows the projector's wireless MAC address. The projector's wireless MAC address Select whether to turn the DHCP function on or off for wireless connections. The following settings cannot be configured manually when this setting is [ON], because the IP address is acquired from the server. [IP address] [Subnet mask] [Default gateway] OFF Enter the projector's wireless IP address in 1-byte numbers. 192.168.253.254 Enter the wireless subnet mask in 1byte numbers. 255.255.255.0 Enter the wireless default gateway IP address in 1-byte numbers. 0.0.0.0 Select a simple method of establishing None (configure a wireless connection. manually) Select the wireless connection mode. infrastructure mode Select the wireless access point's SSID. Click the [Refresh] button to update the list. If the SSID is not listed, enter it in single-byte alphanumeric characters (132 characters). Select the wireless security setting. Open 139