Canon S60 PowerShot S60 Camera User Guide - Page 111

Setting the Power Saving Function 8. Camera Settings This camera is equipped with a power saving function. Depending on the power saving (p. 69), the camera may power down or the LCD monitor may go off automatically. z Auto Power Down [On]: zShooting mode Powers down approximately 3 minutes after the last time a camera control is accessed. The LCD monitor automatically shuts off approximately 1 minute*1 after the last time a camera control is accessed even if [Auto Power Down] is set to [Off]. Press any of the camera's button to turn the LCD monitor back on. *1 This time can be changed. zPlayback mode Powers down approximately 5 minutes after the last time a control is accessed on the camera. zPrinter Connection mode Powers down approximately 5 minutes after the last time a control is accessed on the camera or something is printed on the printer. [Off]: The power saving function does not activate. z Display Off (Shooting Mode Only) The LCD monitor shuts off after a specified period of time elapses and no camera control is accessed. The following time settings can be selected: 10 sec./20 sec./ 30 sec./1 min.*2/2 min./3 min. *2 Default setting When the Auto Power Down Function Activates Turn the power on again. Shooting mode: Close the lens cover, then open it again. Playback/Printer Connection mode: Press the (Playback) button. When the Display Off Function Activates The LCD monitor will be displayed if any of the camera's buttons are pressed. Š Please note that the camera continues to consume a minimal amount of power even when the power saving function shuts it down. Š The power saving function is disabled while a slide show plays on the camera or during a computer connection (p. 104, 117). 8. Camera Settings 109