Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 110
Specifying Detailed Settings, Click [Preview settings].
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
3 Change the position or size of the preset preview frame (yellow) displayed on [Full Image] to set the preset position. If you click on the full video, the preview frame will move to center on the clicked position. 4 Click [Preview settings]. The settings are reflected in the video display area. If you previewed incorrect settings, etc., and want to restore the settings registered in the camera, click [Restore settings]. 5 Click [Save settings]. Note Digital PTZ is a function for transmitting only the specified part of a camera video. Therefore, this function reduces the load on the network. Specifying Detailed Settings If you want to fine-tune the camera angle or to adjust the image, etc., click [Detailed Settings] and specify the detailed settings before saving the preset settings in the camera. 1 Select the [Show in viewers] checkbox. 4 Click [Preview settings]. The settings are reflected in the preview frame on the panorama screen and the video display area. If you previewed incorrect settings, etc., and want to restore the settings registered in the camera, click [Restore settings]. 5 Click [Save settings]. Important • To use presets in the viewer, select the [Show in viewers] checkbox. • Set presets again if the camera mounting conditions have been changed. • Check preset settings again if the [Video] > [Video Size Set] settings on the Setting page have been changed. • If [Manual] is selected in [Focus Mode], manually adjust the focus while checking the actual image in the video display area. After the focus has been adjusted, set the focus using [Get camera info]. Click [Save settings] to save the focus settings. • If the image stabilizer setting is changed after a preset has been set, the viewing angle during operation will no longer agree with the viewing angle at the time the preset was set (p. 58). Check the preset settings again if the image stabilizer setting is changed. • If a dome housing is used, be sure to set presets with the dome installed. Note • Changes to preset settings are not reflected in already connected viewers. • You can disable presets in the viewer by clearing the [Show in viewers] checkbox under [Detailed settings]. • The [BLC] is not available if [Smart Shade Control] is set to [Auto]. • If you set [Smart Shade Control] to [Auto] or [1] to [7], [Haze Compensation] is set to [Disable]. • If you set [Haze Compensation] to [Auto] or [1] to [7], [Smart Shade Control] is set to [Disable]. 2 Click [Get camera info]. The camera parameters in the video display area are loaded to [Detailed Settings]. 3 Fine-tune the camera angle and adjust the image quality with focus or smart shade control while checking the image. 110