Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 76
IPv6 Host Access Restrictions, Default Policy], Prefix / Prefix Length]
![]() |
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Note If the same address is duplicated, the policy for the address that appears highest on the list will be applied. IPv6 Host Access Restrictions (1) [Apply Host Access Restrictions] Set IPv6 host access restrictions to [Disable] or [Enable]. (2) [Default Policy] If IPv6 host access restrictions are applied, select [Authorize Access] or [Prohibit Access] for the default policy. (3) [Prefix / Prefix Length] Create a list of permitted hosts and restricted hosts and set IPv6 address access for each host to [Yes] or [No]. You can specify the prefix length and set access restriction by network or host. If access is prohibited, access to all ports is restricted. 76
![](/manual_guide/products/canon-vbh43-network-camera-vbh43vbh630vevbh630dvbh730fvbm42vbm620vevbm620dvbm720f-operation-guide-1f8c8c0/76.png)
76
Note
If the same address is duplicated, the policy for the address that
appears highest on the list will be applied.
IPv6 Host Access Restrictions
(1)
[Apply Host Access Restrictions]
Set IPv6 host access restrictions to [Disable] or
[Enable].
(2)
[Default Policy]
If IPv6 host access restrictions are applied, select
[Authorize Access] or [Prohibit Access] for the default
policy.
(3)
[Prefix / Prefix Length]
Create a list of permitted hosts and restricted hosts
and set IPv6 address access for each host to [Yes] or
[No].
You can specify the prefix length and set access
restriction by network or host.
If access is prohibited, access to all ports is
restricted.