Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 51
DHCPv6 server. Select [Use DHCP/DHCPv6] to use a, To set [Use DHCP], select [Auto DHCP] in [IPv4
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc (4) [IPv4 Default Gateway Address] (5) [Prefix Length] Enter an appropriate value if [Manual] is specified in Enter a prefix length from 16 to 128 if [Disable] is (1). Be sure to set when connecting the camera to a specified in (2). different subnet from that of the viewer. (6) [IPv6 Default Gateway Address] (5) [AutoIP] Enter a default gateway address if [Disable] is Set AutoIP to [Disable] or [Enable]. (6) [IPv4 Address (AutoIP)] specified in (2). Be sure to set when connecting the camera to a different subnet from that of the viewer. 4 When [Enable] is selected in (5), an automatically set (7) [IPv6 Address (Auto)] IP address is displayed. If [Enable] is specified in (1) and [Enable] is specified in (2) and (3), then the automatically acquired address Important will be shown. Setting Page • Contact your System Administrator for the [IPv4 Address], [Subnet Mask] and [IPv4 Default Gateway Address]. Important • The camera's IP address cannot be set to an IP address that starts with 127., such as 127.0.0.1. • If any of the [IPv4 Address], [Subnet Mask] or [IPv4 Default Gateway Address] settings is wrong, network access may be disabled. In this case, use Camera Management Tool to set the address again (p. 28). • The camera may become inaccessible from the active web browser if settings are changed in [IPv4 Address], [Subnet Mask] or [IPv4 Default Gateway Address]. Check beforehand the precautions in "Important" in "[Reboot Item] Setting Items Requiring Rebooting" (p. 87). • If [Auto (DHCP)] is selected as the IPv4 address setting mode, the IPv4 address may not be assigned correctly in certain environments, such as when a router is present between the DHCP server and the camera. In this case, assign a fixed IPv4 address from the [Manual] settings. • Contact your System Administrator for the [IPv6 Address (Manual)], [Prefix Length] and [IPv6 Default Gateway Address]. • The camera may become inaccessible from the active web browser if settings are changed in [IPv6], [IPv6 Address (Manual)], [Prefix Length] or [IPv6 Default Gateway Address]. Check beforehand the precautions in "Important" in "[Reboot Item] Setting Items Requiring Rebooting" (p. 87). Note In an environment where IPv6 cannot be used, if IPv6 is set to [Enable] and auto is set to [Enable], then the [IPv6 Address (Auto)] field will display the link-local address only. DNS IPv6 (1) [IPv6] Set IPv6 use to [Disable] or [Enable]. (2) [Auto (RA)] Select [Enable] to set an address automatically using RA (Router Advertisement, network information automatically transmitted from a router), or select [Disable] not to set an address automatically. (3) [Auto (DHCPv6)] Select [Enable] to use DHCPv6 to set an address automatically or [Disable] not to set an address automatically. (4) [IPv6 Address (Manual)] Enter a fixed IPv6 address. (1) [Name Server Address 1], [Name Server Address 2] Enter the name server address you want to register. To register only one address, keep the [Name Server Address 2] field blank. (2) [Auto-Setting of Name Server Address] Select the method for setting the name server address automatically using DHCP. Select [Use DHCP] to use a name server address obtained automatically from the DHCP server. Select [Use DHCPv6] to use a name server address obtained automatically from the DHCPv6 server. Select [Use DHCP/DHCPv6] to use a name server address obtained automatically from the DHCP server or DHCPv6 server. Select [Disable] if not using DHCP. To set [Use DHCP], select [Auto (DHCP)] in [IPv4 Address Setting Method]. 51