Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 54
[Date and Time] Setting Date and Time, Current Date and Time, Setting
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
[Date and Time] Setting Date and Time The following can be set here. • Current Date and Time The date and time set in the camera is shown. • Setting Select the date and time setting method, time zone and daylight saving time for the camera. The [Time Zone] is not selected automatically, and must be set separately as required. (3) [Auto-Setting of NTP Server] When [Setting Method] is set to [Synchronize with NTP server], select a DHCP option for the automatic setting method of the NTP server. Current Date and Time [Date], [Time] The date and time currently set in the camera are shown. Setting (1) [Setting Method] Select from [Set manually], [Synchronize with NTP server], [Synchronize with NTP broadcast], [Synchronize with computer time]. (2) [Date], [Time] Set the following according to the selection made in [Setting Method]. [Set manually] Set the desired date and time. The date is set by , and the time in 24-hour format in the order . [Synchronize with NTP server] The camera will synchronize with the NTP server time. [Synchronize with NTP broadcast] The camera will synchronize with the NTP server time. The camera will synchronize time with NTP broadcasts received from the NTP server. [Synchronize with computer time] The camera will synchronize with the date and time of the computer currently accessing the camera. [Disable] Select when specifying an arbitrary NTP server. Enter the IP address or host name of the NTP server used in [NTP Server]. [Use DHCP] The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server. In order to set [Use DHCP], you must change [Network] > [IPv4 Address Setting Method] to [Auto (DHCP)] (p. 50). The NTP server address acquired from the DHCP server will appear in [NTP Server (DHCP)]. [Use DHCPv6] The camera time is synchronized with the time of the NTP server at the address acquired from the DHCPv6 server. In order to set [Use DHCPv6], you must change [Network] > [IPv6] to [Enable], then set [Auto (DHCPv6)] to [Enable] (p. 51). The NTP server address acquired from the DHCPv6 server will appear in [NTP Server (DHCPv6)]. [Use DHCP/DHCPv6] The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server or DHCPv6 server. If the NTP server (address) can be acquired from both the DHCP server (IPv4) and DHCPv6 server, the NTP server address acquired from the DHCP server (IPv4) will be used. (4) [Time Zone] Select from the list the appropriate time difference from the Greenwich Mean Time. 54