Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 69
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security 4 The following can be set here. Audio Server Setting Page • Video Server Set the video transmission from the camera. • Audio Server Set the audio transmission/reception. • HTTP Server Set the authentication method, and HTTP port number. • FTP Server Configure settings for FTP server use. • WS-Security Configure settings for checking the time with WSSecurity. Video Server (1) [Audio Transmission from the Camera] When [Enable] is selected, the audio input through the microphone attached to the camera can be transmitted to the Viewer. (2) [Input Volume] Set the volume of input for the microphone connected to the camera in the range of 1 to 100. The greater the value, the larger the input volume becomes. (1) [Maximum Number of Clients] Set the maximum number of clients that can be connected to the camera at the same time. Up to 30 clients can be set. If 0 is set, connection is prohibited except for the Administrator. (2) [Camera Control Queue Length] Set the maximum queue length for clients requesting camera control privilege from the viewer. The maximum number is 30. Enter an integer from 0 to 30. If 0 is set, camera control is prohibited except for the Administrator. (3) [Voice Activity Detection] If [Enable] is selected, the audio transmission is stopped temporarily when no audio is output. This way, the load of the applicable network can be reduced. (4) [Audio Reception from Viewer] If [Enable] is selected, the audio received from the Admin Viewer and RM Viewer can be output from the speaker with amplifier connected to the camera. (5) [Output Volume] Set the volume of output for the speaker connected to the camera in the range of 1 to 100. The greater the value, the larger the output volume becomes. • Audio Transmission • Input Volume • Voice Activity Detection (3) [Maximum Connection Time (sec.)] Set the time in seconds during which an individual client can connect to the camera. The maximum number is 65535. Enter an integer from 0 to 65535. If 0 is set, the connection time becomes unlimited. (4) [Camera Control Time (sec.)] Enter the maximum time VB Viewer can retain camera control privileges. The maximum number is 3600. Enter an integer from 1 to 3600. • Audio Reception • Output Volume 69