Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 68
E-mail Notification, Select [None], [POP before SMTP] or [SMTP-AUTH]
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
[Maximum Number of Loops] If [Loop] is set under [File Naming], enter the maximum number of loops in the range of 0 to 9999. [User Setting] Images are uploaded according to the file naming method specified in [Subdirectory Name to Create] and [File Name to Create]. [Subdirectory Name to Create], [File Name to Create] If file naming is set to [User Setting], enter the subdirectory name to be created as well as the name of the created file (using up to 127 characters). Parameters can be specified in the entry with the "%" character (p. 164). (7) [FTP Upload Test] Clicking [Exec] initiates an upload test based on the settings currently entered. Only one JPEG image is uploaded. It is not necessary to click [Apply]. After entering a password, first click [Exec], then [Apply] the password. E-mail Notification (1) [Notification] Select [Text Only] or [Text with Image] as the content of notification. If [Upload] is set to [Upload Disabled], [Text with Image] will not be available. (2) [Copy E-mail Settings] Copy the mail settings used in [Maintenance] > [Log Notifications] (p. 88). (3) [Mail Server Name] Enter the host name or IP address of the SMTP server (using up to 63 characters). (4) [Mail Server Port] Enter the port number of the SMTP server (factory default setting is [25]). (5) [Sender (From)] Set the e-mail address of the sender (using up to 63 characters). (6) [Recipient (To)] Set the e-mail address of the recipient (using up to 63 characters). 68 (7) [Authentication] Select [None], [POP before SMTP] or [SMTP-AUTH] for the e-mail authentication method. Set an appropriate method according to the authentication method used by the SMTP server to send to. [User Name], [Password], [POP Server] If [POP before SMTP] is selected as the e-mail authentication mode, enter the user name and password as well as the host name or IP address of the POP server required for authentication. [User Name], [Password] If [SMTP-AUTH] is selected as the e-mail authentication method, enter the user name and password required for authentication. (8) [Subject] Enter the subject of the e-mail to be sent using up to 31 ASCII characters. (9) [Message Body] Enter the message (text) of the e-mail to be sent using up to 255 ASCII characters. Parameters can be specified with the "%" character (p. 164). (10)[E-mail Notification Test] Clicking [Exec] initiates an e-mail notification test based on the settings currently entered. It is not necessary to click [Apply]. After entering a password, first click [Exec], then [Apply] the password.