Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 73
External Device Output for Inactive Event]
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
[Event] Setting Video Record, Volume Detection, External Device Output/Input, Audio Playback and Timer (2) [Operation Mode] (10)[External Device Output for Inactive Event] Select the circuit condition of the connected external Select whether external device output (1 or 2) is active device. or inactive upon an inactive event. Select [Disable] to When [Normally Open] is selected, an active event disable external device output. occurs when the terminals of the external device close, and an inactive event occurs when the terminals open. When [Normally Close] is selected, an active event occurs when the terminals of the external device open, and an inactive event occurs when the (11)[Audio Playback at Active Event] Select the audio playback operation to be performed upon an active event. If [Enable] is selected, the audio 4 designated in [Sound Clip] will playback when the external device input becomes active. Setting Page terminals close. (12)[Audio Playback at Inactive Event] (3) [Active Event Operation] Select the operation to be performed upon an active event. If [Enable] is selected, (6) [Preset], (7) [Video Record] and (8) [E-mail Notification] will be executed Select the audio playback operation to be performed upon an inactive event. If [Enable] is selected, the audio designated in [Sound Clip] will playback when the external device input becomes inactive. according to their settings upon an active event. (13)[Sound Clip] (4) [Inactive Event Operation] Select the operation to be performed upon an inactive Select the sound clip to be played. For registration of sound clips, see p. 74. event. If [Enable] is selected, (6) [Preset], (7) [Video (14)[Volume] Record] and (8) [E-mail Notification] will be executed Select the volume of sound clips using an integer of 1 according to their settings upon an inactive event. to 100. The greater the value, the louder the volume (5) [Ongoing Active Event Operation] becomes. Select the operation to be performed while an active (15)[Day/Night Mode Switching] event is ongoing. This can only be set when [Active Select the Day/Night Mode switching behavior when Event Operation] is set to [Enable]. an external device input event is triggered. Select [Enable] to perform operations according to When [Switch to Day Mode] is selected, switches to the (7) [Video Record] and (8) [E-mail Notification] Day Mode when an active event is triggered, and settings during an ongoing active event. switches to Night Mode when an inactive event is (6) [Preset] If a preset is specified, the camera will automatically orient to the specified preset position when an external device input event occurs. To use presets, it is necessary to set presets with the Preset Setting Tool under Admin Tools (p. 106). If there is no need for triggered. When [Switch to Night Mode] is selected, switches to Night Mode when an active event is triggered, and switches to Day Mode when an inactive event is triggered. Select [Disable] to disable Day/Night Mode switching. additional camera operation, select [None]. (7) [Video Record] Specify the video record action. If [Enable] is selected, video will be transmitted to the destination selected in [Video Record Action] (p. 71) when an external device input event occurs. Important • When [Day/Night] in the Admin Viewer is set to [Auto], Day/ Night Mode switching will not happen when an external device input event is triggered (p. 155). • Camera control privileges are released if any of the following actions occur while the Admin Viewer/VB Viewer has camera (8) [E-mail Notification] Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail notification will be performed when an external device input event occurs. To use this function, control privileges. - If the camera angle is moved according to the [Preset] settings - If the Day/Night Mode is switched using [Day/Night Mode Switching]. [Upload] > [E-mail Notification] must also be set (p. 68). Timer (9) [External Device Output for Active Event] Select whether external device output (1 or 2) is active or inactive upon an active event. Select [Disable] to disable external device output. 73