Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 124
Setting by Right-Click Menu, Reducing effects of lighting change, Displaying Event Status
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Important Perform a detection test in advance to make sure that the detection frame continues to be displayed for a subject targeted for passing detection. Note • A ratio of up to 30% can be set for [Object Size (%)] in passing detection. • A passing detection event is notified only when the decision line is crossed. Take care in setting the operation to be performed when an event occurs. Setting by Right-Click Menu Right-click on the Intelligent Function Setting Tool display screen to display the menu. There, the following functions can be used. [Copy detection area/line] Copy the detection area/line of the detection setting selected. [Paste detection area/line] Paste the copied detection area/line to the detection setting selected. It cannot be copied to camera tampering detection. Pasting a detection line is possible only when the source and the target both set passing detection. [Clear detection area/line] Clear the detection area/line of the detection setting selected. It cannot be cleared in camera tampering detection. [Copy detection criteria settings] Copy the detection criteria of the detection setting selected. [Paste detection criteria settings] Paste the copied detection criteria to the detection setting selected. Pasting is possible only if the source and the target are the same detection type. [Copy event settings] Copy the event operations of the detection setting selected. [Paste event settings] Paste the copied event operations to the detection setting selected. Reducing effects of lighting change Intelligent functions may not work when the entire screen is exposed to sudden changes in brightness, for example, when indoor lights are turned on or off. Changing the detection settings may reduce this effect. 1 Click [Detection Settings]. 2 Select [Reduce effects of lighting change]. 3 Click [Save settings]. Important A [Reduce effects of lighting change] setting may not work depending on the operating environment. Sudden changes in brightness that persist may also have the same effect. Perform a detection test to check what will work. Note Since changing [Detection Settings] restarts the intelligent functions, detection will not be performed during the tens of seconds that it takes to complete a restart. Displaying Event Status Click the [Event Display] button to open the event display panel and confirm the detection status icon of the intelligent functions. This panel displays the same information as [Intelligent Function (Image Detection)] in the event display panel of the Admin Viewer. For details, see "Displaying Event Status" (p. 158). Note If the detection setting is not stored in the camera, only the detection status for the currently selected detection setting is displayed. 124