Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 123
Detect criteria for [Passing Detection], Passing Direction], Decision Point], Object, ize %]
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Intelligent Function Setting Tool When [Change Ratio (%)] is changed, an indicator frame representing the percentage of the entire video display area is displayed for 1 second in the center of the area, allowing you to check while specifying the setting. Detect criteria for [Passing Detection] Set the passing direction and decision point of the moving object for the detection line that the moving object will cross. Change ratio indicator 5 Admin Tools Any moving objects detected are shown with contour lines. If it is smaller than [Change Ratio (%)], contour lines are white. If the image is changed for an area larger than [Change Ratio (%)], contour lines take on the same color as the detection area, indicating that "detected" mode has been triggered to ON. Contour of camera tampering object Note Detection will not be possible for three seconds after the change ratio is modified when camera tampering detection is selected, or when switching into camera tampering detection from another detection mode. [Passing Direction] Select the direction for moving objects to pass the detection line. When an object that moves in the selected direction passes the detection line, "line crossed" is detected. A preview display shows the selected passing direction on the detection line in the video display area. [Decision Point] Select the decision point of a moving object in accordance with a detection line. When a decision point selected here crosses the detection line, "line crossed" is detected. In the video display area, a cross mark is displayed to indicate the decision point in the detection frame. Detection frame Decision point Detection line [Object Size (%)] Enter or use the slider to set the size ratio of moving objects for the entire screen. When a moving object exceeds the value set for [Object Size (%)], it becomes a passing detection target. When [Object Size (%)] is changed, an indicator frame showing the size of the object is displayed for 1 second in the center of the video display area, allowing specification of the settings while checking the size ratio. Object size indicator 123