Canon imageCLASS MF5850dn Send Setting Guide - Page 33
Checking/editing network settings
View all Canon imageCLASS MF5850dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Remote UI Sending an e-mail Storing documents Checking Your Settings with the Remote UI Checking/editing network settings About Buttons NOTE Steps 1 to 4 in this section only apply to E-mail settings. Click [Network] in the [Device] menu. Click [Change]. Click [OK]. Make any necessary corrections. Turn OFF the machine's main power switch, wait at least 10 seconds, then turn it ON. E-mail settings Scroll down until you see the [E-mail/IFax Settings] field, and make sure that: - The correct SMTP server name is specified. Also, if your SMTP server uses SMTP authentication, make sure that: - [SMTP Authentication (SMTP AUTH)] is set to [On]. - The user name is specified. - The password is set. After the machine is restarted: Try to send an e-mail. Try to store documents. If you still have trouble: Go to Troubleshooting.