Canon imagePROGRAF iPF755 iPF755 User Manual Ver.1.30 - Page 648

Handling Paper > Handling rolls > Caution • Do not force the Roll Holder into the printer with the right and left ends reversed. This may damage the printer and Roll Holder. • Do not release the flanges until the holder is loaded in the Roll Holder Slot. • Be careful not to pinch your fingers between the Roll Loading Slots (b) and the Roll Holder shaft (c) when loading rolls. 6. Advance the roll to insert the leading edge in the Paper Feed Slot (a) until you hear a tone. Important • Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the print- 7 ing surface. • If the paper is wrinkled or warped, straighten it out before loading it. • Load paper straight so it is not fed askew. 7. Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") →P.641 632 Manag- eRemain- Barcodes Roll Printer Operation After the Paper is Fed Off Printed A menu for selection of the type of paper is automatically shown on the Display Screen. Not prin- Press ▲ or ▼ to select the type of paper, and then press the OK button. ted On Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll. There is no need to specify the type and length of the paper. Loading Rolls in the Printer iPF755