Canon imagePROGRAF iPF755 iPF755 User Manual Ver.1.30 - Page 853

Troubleshooting > The printer stops during a print job > The printer stops during a print job An error message is shown on the Display Screen 837 The printer ejects blank, unprinted paper ...837 An error message is shown on the Display Screen Status An error message is displayed during printing. The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Corrective Action Check the error message and take action as necessary. (See "Error Messages →P.860 .") Remove the used roll and insert a new roll. (See "Removing the Roll from the Printer.") →P.636 (See "Removing the Roll Holder from Rolls.") →P.639 (See "Loading and Printing on Rolls.") →P.3 The printer ejects blank, unprinted paper Status Corrective Action The leading edge of the roll paper was cut to straighten it. The leading edge of rolls may be cut to straighten it if you have selected Trim Edge First > On or Automatic in the Control Panel menu. (See "Cutting the Leading Edge of Roll Paper Automatically.") →P.649 The Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (See "Checking for Nozzle Clogging.") →P.795 A print job was received from an incompatible printer driver. Use the correct imagePROGRAF printer driver for the printer and try printing again. The printer has received print data that in- In the Control Panel, set Auto Rotate to Off and print again. cludes HP RTL commands when Auto Ro- (See "Menu Settings.") →P.716 12 tate is On in the Control Panel menu. The printer is damaged. Contact your Canon dealer for assistance. 837 iPF755 An error message is shown on the Display Screen