Canon imagePROGRAF iPF755 iPF755 User Manual Ver.1.30 - Page 95

Enhanced Printing Options > Printing enlargements or reductions > 7. Select and click a roll paper in the L Paper Source list. 8. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 9. In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO A4. 10. Select the C Enlarged/Reduced Printing check box. 11. Click ISO A4 in the G Paper Size list. 12. Click F Scaling and enter 120. Note • You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and right edges of the paper will not be printed. 3 • If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the upper-left corner. In this case, you can center originals by selecting E Print Centered on the Layout sheet. 13. Confirm the print settings and print as desired. Note 79 • For tips on confirming print settings, see "Confirming Print Settings (Windows) →P.205 " Resizing Originals by Entering a Scaling Value (Mac OS X) This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example. • Document: Any Type iPF755 Resizing Originals by Entering a Scaling Value (Mac OS X)