Canon imagePROGRAF iPF755 iPF755 User Manual Ver.1.30 - Page 732

Printer Parts > Control Panel > Menu Settings Menu items are as follows. For instructions on selecting menu items, see "Menu Operations." →P.701 For details on menu levels and values, see "Menu Structure." →P.704 Paper Menu Setting Item Description, Instructions Load Paper Select sheets or rolls and load the paper. Eject Paper Choose this item before removing loaded paper. Chg. Paper Type (*1 →P.717 ) Change the type of paper loaded. (See "Changing the Type of Paper.") →P.633 Chg. Paper Size Change the size of paper loaded. (See "Specifying the Paper Length.") →P.635 (See "Paper Sizes.") →P.623 ManageRemainRoll Choose On to print a barcode at the end of a roll before you remove it. The printed barcode can be used in managing the amount of roll paper left. Choose Off if you prefer not to print the barcode. (See "Keeping Track of the Amount of Roll Paper Left.") →P.641 Paper Details (The type of pa- Head Height Adjust the Printhead height. (See "Troubleshooting Paper per is displayed Abrasion and Blurry Images (Head Height).") →P.671 here.) (*1 →P.717 ) Skew Check Lv. If you print on Japanese paper (washi) or other handmade paper that has an irregular width, choose Loose for a higher 9 skew detection threshold, or choose Off to disable skew detection. However, if paper is loaded askew when detection is Off, note that paper jams or Platen soiling may occur. Cutting Mode Specify whether or not to cut with the standard round-bladed cutter. Choose Automatic to have the roll cut automatically after printing. If you choose Manual, the paper will not be cut after printing. Instead, a line will be printed at the cut position. Choose Eject if you prefer not to have documents dropped immediately after printing, as when waiting for ink to dry. Cut Speed Choose the cutting speed. If you use adhesive paper, choosing Slow helps prevent adhesive from sticking to the cutter and keeps the cutter sharp. Trim Edge First If a roll is loaded, the end of the paper will be cut. 716 CutDustRe- If you choose On, a line will be printed at the cut position duct. when paper cutting is selected. This option reduces the amount of debris given off after cutting. It also helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you use adhesive paper. (See "Reducing Dust from Cutting Rolls.") →P.651 VacuumStrngth Specify the level of suction that holds paper against the Platen. (See "Adjusting the Vacuum Strength (VacuumStrngth).") →P.680 Menu Settings iPF755