Canon imagePROGRAF iPF755 iPF755 User Manual Ver.1.30 - Page 883

Error Message > Messages regarding paper > Roll printing is selected, but sheets are loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Follow these steps to load and print on a roll. 1. Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet. (See "Removing Sheets.") →P.659 2. Load a new roll. (See "Loading Rolls in the Printer.") →P.630 The printer now starts printing the print job. Press ▲ or ▼ to select Stop Printing, and then press the OK button. The roll is empty. Cause Corrective Action The roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size. 1. Press the Release Lever back and remove the roll. (See "Removing the Roll from the Printer.") →P.636 (See "Removing the Roll Holder from Rolls.") →P.639 2. Load the new roll. (See "Attaching the Roll Holder to Rolls.") →P.626 (See "Loading Rolls in the Printer.") →P.630 3. If no barcode was printed on the roll, specify the type of paper. (See "Changing the Type of Paper.") →P.633 4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on the roll, also specify the paper length. (See "Specifying the Paper Length.") →P.635 5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. There is remaining The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be roll paper, but be- helpful to change the printing mode, which will change the paper feed timing. 13 cause it could not Choose a higher level of Print Quality in the Advanced Settings of the printer driver. be advanced, it (See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →P.54 could not be detec- ted. Sheet printing is selected. 867 Cause You have attempted to print a test print sheet or other printer status information on a sheet, but no sheet is loaded. Corrective Action Press ▲ or ▼ to select Load Cut Sheet, and then press the OK button. Load the sheet, and then print. (See "Loading and Printing on Sheets.") →P.6 To print on rolls, follow these steps. iPF755 Roll printing is selected, but sheets are loaded.