Canon imagePROGRAF iPF755 iPF755 User Manual Ver.1.30 - Page 887
Rel lever is in wrong position., Borderless printng not possible.
View all Canon imagePROGRAF iPF755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 887 highlights
Error Message > Messages regarding paper > Rel lever is in wrong position. Cause The Release Lever is pushed back. Corrective Action Pull the Release Lever forward. Turn off the printer and wait a while before restoring power. Borderless printng not possible. Cause Corrective Action The print job received specifies a type or width of paper that is not compatible with borderless printing. Follow these steps to change the settings of the print job to enable borderless printing. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Make sure the correct printer driver for the printer is selected and try printing again. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (See "Types of Paper.") →P.620 Select None when you have set Detect Mismatch on the control panel to Warning. However, note that this error may cause paper jams and affect the printing quality. Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document will be printed with a border. The loaded paper is a size not compatible with borderless printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Replace the paper with paper compatible for borderless printing as follows. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. (See "Removing the Roll from the Printer.") →P.636 (See "Removing the Roll Holder from Rolls.") →P.639 2. Replace the paper with paper compatible for borderless printing. (See "Attaching the Roll Holder to Rolls.") →P.626 (See "Loading Rolls in the Printer.") →P.630 The printer now starts printing the print job. For information on types of paper compatible with borderless printing, refer to 13 the Paper Reference Guide. (See "Types of Paper.") →P.620 Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document will be printed with a border. Paper position not suitable for borderless printing. 871 Cause Because paper expands or contracts depending on the environment of use, it may become narrower or wider than the supported width for borderless printing. Corrective Action Press ▲ or ▼ to select Stop Printing, and then press the OK button. Use each type of paper only where the recommended environmental conditions are met. For details on environmental conditions for various paper, see the Paper Reference Guide. (See "Types of Paper.") →P.620 iPF755 Rel lever is in wrong position.