Canon imagePROGRAF iPF755 iPF755 User Manual Ver.1.30 - Page 856
The edges of the paper are dirty, The surface of the paper is dirty, DustReduct., Head Height
View all Canon imagePROGRAF iPF755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 856 highlights
Troubleshooting > Problems with the printing quality > The edges of the paper are dirty Cause Corrective Action The Platen has become dirty after borderless printing or printing on small paper. Open the Top Cover and clean the Platen. (See "Cleaning Inside the Top Cover.") →P.811 The type of paper as specified on the printer does not match the type specified in the printer driver. Make sure the same type of paper is specified on the printer as in the printer driver. (See "Changing the Type of Paper.") →P.633 Make sure the same paper type is specified in the printer driver as on the printer. 1. Press the Stop button and stop printing. 2. Change the type of paper in the printer driver and try printing again. The paper is wrinkled or warped. Straighten out the wrinkles or curls and reload the paper. Do not use paper that has been printed on previously. (See "Loading Rolls in the Printer.") →P.630 (See "Loading Sheets in the Printer.") →P.652 A cut line is printed because CutDustReduct. is On in the Control Panel menu to reduce cutting dust. If this function is not needed, set CutDustReduct. to Off in the Control Panel menu. (See "Menu Settings.") →P.716 The Printhead is set too low in the Control Panel menu. In the Control Panel menu, set Head Height to Automatic. (See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.671 You are printing on heavyweight paper or paper that curls or wrinkles easily after absorbing ink. When printing on Heavyweight Coated Paper or other paper-based media, choose a VacuumStrngth setting of Strong or Strongest in the Control Panel menu. If the paper still rubs, set Head Height to Highest in the Control Panel menu. (See "Adjusting the Vacuum Strength (VacuumStrngth).") →P.680 (See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.671 12 When printing on CAD Tracing Paper or other film-based media, choose a VacuumStrngth setting of Standard, Strong, or Strongest in the Control Panel menu. If the paper still rubs, set Head Height to Highest in the Control Panel menu. (See "Adjusting the Vacuum Strength (VacuumStrngth).") →P.680 (See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.671 The Ejection Guide is soiled. Clean the Ejection Guide. (See "Cleaning the Printer Exterior.") →P.811 840 The surface of the paper is dirty Cause The Paper Retainer is soiled. You are using a paper that does not dry easily. Corrective Action Clean the Paper Retainer. (See "Cleaning Inside the Top Cover.") →P.811 In the Control Panel menu, set Roll DryingTime to at least 1 min. (See "Menu Settings.") →P.716 The edges of the paper are dirty iPF755