Canon imageRUNNER ADVANCE C5240A imageRUNNER ADVANCE C5200 Srs Basic Operation - Page 32

Sending a Fax This section describes the flow of basic fax operations. An optional product is required to use the Fax function. 1 Placing Originals 2 Selecting Function Place the original on the feeder or the platen glass. Select [Fax] from the Main Menu screen. Placing originals in the feeder Adjust the slide guides to fit the size of your originals. Neatly place your originals with the side to be copied face up. Press [Fax]. Placing originals on the platen glass Open the feeder/platen cover. Place your originals face down. Fax Basic Features screen is displayed. You can set various facsimile functions. For more information, see from p. 34 to p. 37 in this manual. Gently close the feeder/platen cover. • If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/ PIN). If the Copy Card Reader-F1 is attached, first insert a control card. • If a login service, such as Department ID Management or SSO-H has been set, press (Log In/Out) to log out. • The send settings for the last send job may be retained. - To cancel the settings, press (Reset). - The specified destinations are not retained. 32