Canon imageRUNNER ADVANCE C5240A imageRUNNER ADVANCE C5200 Srs Basic Operation - Page 92
Replacing the Staple Cartridge Inner Finisher-E1, Pull out the staple case from the finisher.
View all Canon imageRUNNER ADVANCE C5240A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Replacing the Staple Cartridge (Inner Finisher-E1) When the Inner Finisher-E1 is almost out of staples and the staple cartridge must be replaced, a screen prompting you to replace the staple cartridge appears on the touch panel display. Follow the procedure described below to replace the staple cartridge. 1 Pull out the staple case from the finisher. 2 1 1. Open the front cover of the finisher. 2. Lift and pull out the staple case from the stapler unit, holding it by the green tab. 2 Pull out the empty staple cartridge from the staple case. 1. Press the areas indicated by PUSH on both sides of the 1 staple case. 2. Once you have released the spring-loaded case, pull out the staple cartridge. PUSH 1 2 3 Insert a new staple cartridge into the staple case. 2 1 3 1. Insert a new staple cartridge. 2. Press the spring-loaded case down until it clicks into place. 3. Remove the seal holding the staples together, by pulling it straight out. • Do not remove the seal that holds the staples together before you place the staple cartridge into the staple case. • Only one staple cartridge can be inserted at a time. • Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear. 92