Canon imageRUNNER ADVANCE C5240A imageRUNNER ADVANCE C5200 Srs Basic Operation - Page 88
Pull out the empty staple cartridge from the staple case., is securely in place.
View all Canon imageRUNNER ADVANCE C5240A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
3 Pull out the empty staple cartridge from the staple case. 1. Press the areas indicated by PUSH on both sides of the 1 staple case. 2. Once you have released the spring-loaded case, pull out the staple cartridge. PUSH 1 2 4 Insert a new staple cartridge into the staple case. 2 1 3 1. Insert a new staple cartridge. 2. Press the spring-loaded case down until it clicks into place. 3. Remove the seal holding the staples together, by pulling it straight out. • Do not remove the seal that holds the staples together before you place the staple cartridge into the staple case. • Only one staple cartridge can be inserted at a time. • Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear. 5 Gently push the staple case back into the finisher and push down firmly until it is securely in place. 88