Casio EX-S770 Owners Manual - Page 278

Problem Possible Causes Digital zoom does not 1) The digital zoom setting is turned off. work. The zoom bar 2) Date stamping is turned on. indicates zoom only up to a zoom factor of 3.0. Movies There is a vertical line on the monitor screen Shooting a very brightly lit subject can cause a vertical band to appear in the monitor screen image. Images are out of focus. The subject is outside the range of the camera. There is digital noise Sensitivity is increased automatically for dark subjects, in images. which increases the chance of digital noise. Playback The color of the Sunlight or light from another source is shining directly playback image is into the lens when shooting. different from what appears on the monitor screen when shooting. Images are not displayed. A memory card with non-DCF images recorded with another camera is loaded in the camera. All buttons and switches are disabled. Circuit problem caused by electrostatic charge, impact, etc. while the camera was connected to another device. Action 1) Turn on the digital zoom setting (page 75). 2) Turn off date stamping (page 131). Digital zoom is disabled while date stamping is turned on. This is a CCD phenomenon known as "vertical smear", and does not indicate malfunction of the camera. Note that vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a movie. Shoot within the allowable range. Use a light or some other means to illuminate the subject. Position the camera so sunlight does not shine directly into the lens. This camera cannot display non-DCF images. Remove the battery from the camera, reinsert it, and then try again. 278 APPENDIX