Casio EX-Z30 Owners Manual - Page 110
To re-record audio, to select Delete, and then
View all Casio EX-Z30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
PLAYBACK To re-record audio 1. In the PLAY mode, use [̇] and [̈] to scroll through snapshots until the one whose audio you want to re-record is displayed. 2. Select the "PLAY" tab, select "Dubbing", and then press [̈]. 3. Use [̆] and [̄] to select "Delete", and then press [SET]. • If you merely want to delete the audio with re- recording, press [MENU] here to complete the procedure. 4. Press the shutter release button to start audio recording. 5. Recording stops after about 30 seconds or when you press the shutter release button. • This deletes the previous recording and replaces it with a new one. IMPORTANT! • Keep the microphone Microphone on the front of the camera pointed at the subject. • Take care that you do not block the microphone with your fingers. • Good recording results are not possible when the camera is too far from the subject. • Operating camera buttons during recording can cause button noise to be included in the audio. • The (Audio) icon appears on the monitor screen after audio recording is complete. • You will not be able to record audio when remaining memory capacity is low. • The following types of audio recording are not supported. - Adding audio to a movie image - Adding audio to a protected snapshot (page 115) • Audio that is re-recorded or deleted cannot be recovered. Make sure you no longer need audio before re-recording or deleting it. 110