Casio XJ-460 Owners Manual - Page 44
Input Settings, Signal Name Indicator, Input Source Specific Menu Items, Setting Explanations,
![]() |
View all Casio XJ-460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Using the Setup Menu IInput Settings J Signal Name Indicator This sub-menu lets you specify whether or not the name of the currently selected input source should be displayed in the projected image. Input Source Specific Menu Items Input Source RGB Component S-VIDEO VIDEO No Signal Available Items (Parentheses indicate defaults.) (On), Off Setting Explanations On: Turns on display of the name of the currently selected input source in the projected image. Off: Turns off display of the input source name. Setting Storage A single setting is stored, which is applied to all input sources. IInput Settings J Special Signal When a computer is connected to the RGB input terminal, the projector automatically detects the type of RGB signal being sent from the computer and projects the image. Some signals, however, cannot be detected properly by the projector. When auto detection is not possible for some reason, try using this setting for a computer signal with a resolution of SXGA (1280 × 1024) or SXGA+ (1400 × 1050). Input Source Specific Menu Items Input Source RGB Component S-VIDEO VIDEO No Signal Available Items (Parentheses indicate defaults.) 1280 × 1024, (1400 × 1050) None * Only when the currently selected input source is RGB. Setting Explanations 1280 × 1024: Specifies an SXGA (1280 × 1024) resolution RGB signal. 1400 × 1050: Specifies an SXGA+ (1400 × 1050) resolution RGB signal. Setting Storage This setting is saved for the RGB input terminal only. 44
![](/manual_guide/products/casio-xj460-owners-manual-d629a0e/44.png)