Cisco 6509E Supervisor Guide - Page 95
Console Port Mode 1 Signaling and Pinouts, DB-9 Adapter (for Connecting to a PC)
View all Cisco 6509E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Appendix B Port, Cable, and Connector Specifications Console Port Console Port Mode 1 Signaling and Pinouts This section provides the signaling and pinouts for the console port in mode 1 (CONSOLE PORT MODE switch in the in position). DB-9 Adapter (for Connecting to a PC) Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-9 female DTE adapter (labeled "Terminal") to connect the console port to a PC running terminal emulation software. Table B-1 lists the pinouts for the asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-9 female DTE adapter. Table B-1 Port Mode 1: Console Port Signaling and Pinouts (DB-9 Adapter) Console Port RJ-45-to-RJ-45 Rollover Cable RJ-45-to-DB-9 Console Terminal Adapter Device Signal RTS RJ-45 Pin 11 RJ-45 Pin DB-9 Pin 8 8 Signal CTS DTR 2 7 6 DSR TxD 3 6 2 RxD GND 4 5 5 GND GND 5 4 5 GND RxD 6 3 3 TxD DSR 7 CTS 81 2 4 1 7 DTR RTS 1. Pin 1 is connected internally to Pin 8. OL-7397-03 Catalyst 6500 Series Supervisor Engine Guide B-3