Cisco 6509E Supervisor Guide - Page 96

Console Port Appendix B Port, Cable, and Connector Specifications DB-25 Adapter (for Connecting to a Terminal) Use the RJ-45-to-RJ-45 rollover cable and the RJ-45-to-DB-25 female DTE adapter (labeled "Terminal") to connect the console port to a terminal. Table B-2 lists the pinouts for the asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-25 female DTE adapter. Table B-2 Port Mode 1: Console Port Signaling and Pinouts (DB-25 Adapter) Console Port RJ-45-to-RJ-45 Rollover Cable Signal RTS RJ-45 Pin 11 RJ-45 Pin 8 DTR 2 7 TxD 3 6 GND 4 5 GND 5 4 RxD 6 3 DSR 7 3 CTS 81 1 1. Pin 1 is connected internally to Pin 8. RJ-45-to-DB-25 Terminal Adapter DB-25 Pin 5 6 3 7 7 2 20 4 Console Device Signal CTS DSR RxD GND GND TxD DTR RTS Modem Adapter Use the RJ-45-to-RJ-45 rollover cable and the RJ-45-to-DB-25 male DCE adapter (labeled "Modem") to connect the console port to a modem. Table B-3 lists the pinouts for the asynchronous serial auxiliary port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-25 male DCE adapter. Table B-3 Port Mode 1: Console Port Signaling and Pinouts (Modem Adapter) Console Port RJ-45-to-RJ-45 Rollover Cable RJ-45-to-DB-25 Modem Modem Adapter Signal RTS RJ-45 Pin 11 RJ-45 Pin DB-25 Pin 8 4 Signal RTS DTR 2 7 20 DTR TxD 3 6 3 TxD GND 4 5 7 GND GND 5 4 7 GND RxD 6 3 2 RxD DSR 7 CTS 81 3 8 1 5 DCD CTS 1. Pin 1 is connected internally to Pin 8. Catalyst 6500 Series Supervisor Engine Guide B-4 OL-7397-03