Cisco 7609-S Software Configuration Guide - Page 755

Chapter 42 Configuring PFC3BXL or PFC3B Mode MPLS QoS Configuring PFC3BXL or PFC3B Mode MPLS QoS Displaying the Configuration of All Classes To display the configuration of all classes configured for all service policies on the specified interface, perform this task: Command Router# show policy interface interface_type interface_number Purpose Displays the configuration of all classes configured for all policy maps on the specified interface. This example shows the configurations for all classes on Fast Ethernet interface 3/27: Router# show policy interface fastethernet 3/27 FastEthernet3/27 Service-policy input: ip2tag class-map: iptcp (match-all) Match: access-group 101 police : 1000000 bps 1000000 limit 1000000 extended limit Earl in slot 5 : 0 bytes 5 minute offered rate 0 bps aggregate-forwarded 0 bytes action: set-mpls-exp-imposition-transmit exceeded 0 bytes action: drop aggregate-forward 0 bps exceed 0 bps class-map: class-default (match-any) Match: any Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Configuring PFC3BXL or PFC3B Mode MPLS QoS Egress EXP Mutation You can configure a named egress EXP mutation map to mutate the internal DSCP-derived EXP value before it is used as the egress EXP value. You can attach a named egress EXP mutation map to any interface on which PFC QoS supports egress QoS. These sections describe how to configure PFC3BXL or PFC3B mode MPLS QoS egress EXP mutation: • Configuring Named EXP Mutation Maps, page 42-30 • Attaching an Egress EXP Mutation Map to an Interface, page 42-30 OL-4266-08 Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX 42-29