Cisco 7609-S Software Configuration Guide - Page 756

Configuring PFC3BXL or PFC3B Mode MPLS QoS Chapter 42 Configuring PFC3BXL or PFC3B Mode MPLS QoS Configuring Named EXP Mutation Maps To configure a named EXP mutation map, perform this task: Command Step 1 Router(config)# mls qos map exp-mutation name mutated_exp1 mutated_exp2 mutated_exp3 mutated_exp4 mutated_exp5 mutated_exp6 mutated_exp7 mutated_exp8 Router(config)# no mls qos map exp-mutation name Step 2 Router(config)# end Step 3 Router# show mls qos maps Purpose Configures a named EXP mutation map. Reverts to the default map. Exits configuration mode. Verifies the configuration. When configuring a named EXP mutation map, note the following information: • You can configure 7 named EXP mutation maps. • You can enter up to eight EXP values that map to a mutated EXP value. • You can enter multiple commands to map additional EXP values to a mutated EXP value. • You can enter a separate command for each mutated EXP value. • You can attach named EXP mutation maps to any interface on which PFC QoS supports egress QoS. Attaching an Egress EXP Mutation Map to an Interface To attach an egress EXP mutation map to an interface, perform this task: Step 1 Step 2 Step 3 Step 4 Command Purpose Router(config)# interface {{vlan vlan_ID} | {type1 slot/port[.subinterface]} | {port-channel number[.subinterface]}} Selects the interface to configure. Router(config-if)# mls qos exp-mutation exp-mutation-table-name Attaches an egress EXP mutation map to the interface. Router(config-if)# no mls qos exp-mutation Removes the egress DSCP mutation map from the interface. Router(config-if)# end Exits configuration mode. Router# show running-config interface {{vlan vlan_ID} | {type slot/port} | {port-channel number}} Verifies the configuration. 1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet This example shows how to attach the egress EXP mutation map named mutemap2: Router(config)# interface fastethernet 3/26 Router(config-if)# mls qos exp-mutation mutemap2 Router(config-if)# end 42-30 Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX OL-4266-08