Cisco 7609-S Software Configuration Guide - Page 806

Monitoring and Maintaining NAC Chapter 45 Configuring Network Admission Control Monitoring and Maintaining NAC You can perform the tasks in these sections to monitor and maintain NAC: • Clearing Table Entries, page 45-22 • Displaying NAC Information, page 45-22 Clearing Table Entries To clear client entries in the EAPoUDP session table, use the clear eou privileged EXEC command. After the entries are removed, they are created only after the switch receives an ARP packet from the host or after it creates a DHCP binding entry for the host. To clear entries in the IP device tracking table on the switch, use the clear ip device tracking privileged EXEC command. Displaying NAC Information To display NAC information, perform one of the following tasks: Command Router# show dot1x [all | interface interface_id | statistics interface interface_id] Router# show eou {all | authentication {clientless | eap | static} | interface interface_id | ip ip_address | mac mac_address | posturetoken name} Router# show ip admission {[cache] [configuration] [eapoudp]} Router# show ip device tracking {all | interface interface_id | ip ip_address | mac mac_address} Purpose Displays IEEE 802.1x statistics, administrative status, and operational status. Displays information about the EAPoUDP configuration or session cache entries. Displays the NAC configuration or network admission cache entries. Displays information about the entries in the IP device tracking table. Tip For additional information (including configuration examples and troubleshooting information), see the documents listed on this page: http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html 45-22 Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX OL-4266-08