Cisco 891W Hardware Installation Guide - Page 54
Installing in a Rack, Screw Location
View all Cisco 891W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Installing the Router Chapter 2 Installing the Router Installing in a Rack The Cisco 890 series ISRs can be mounted in a rack. To install a Cisco 890 series ISR in a rack, follow these steps: Step 1 Remove the screws shown in Figure 2-6. Figure 2-6 Screw Location 1 278159 1 1 Screws Step 2 Using the screws provided, attach the rack-mount brackets to the Cisco 890 series ISR chassis as shown in Figure 2-7. Use two screws on each side. Use a number 2 Phillips screwdriver to install the bracket screws on both sides of the chassis. Caution Do not over torque the screws. The recommended torque is 6 to 8 in-lb (0.7 to 0.9 N-m). Figure 2-7 Attaching the Rack-mount Brackets to the Cisco 890 Series ISR 272484 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-10 OL-16193-07