Cisco 891W Hardware Installation Guide - Page 70
G Adapter SKU, Description, SKUs Supported, Antenna with the SMK-TS- 9 Connector
View all Cisco 891W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Connecting the 3G Card Figure 3-13 Antenna with the SMK-TS- 9 Connector Chapter 3 Connecting the Router 279085 SMK-TS-9 connector Cable Original antenna assembly If you are using an extension cable, you must attach the 3G adapter for extended cable antenna to the body of the router. Depending on the SKU ordered, the adapters come with different connectors. Table 3-1 lists the different adapters and SKUs supported by each adapter. For instructions on how to install the adapter, see the "Installing the 3G Adapter for Extended Cable/Antenna" section on page 3-15. Otherwise, follow Step 7. Table 3-1 3G Adapters and Supported SKUs 3G Adapter SKU Description SKUs Supported 3G-ACC-SMKTS9-TNC 3G adapter for extended cable/antenna with an SMK-TS-9 to TNC connector. Use this with the pentaband dipole indoor antenna (3G-ANTM-SMKTS9). PCEX-3G-HSPA-R6, CISCO881G-G-K9 3G-ACC-SSMB-TNC 3G adapter for extended cable/antenna with an SSMB to TNC connector. Use this with the pentaband dipole indoor antenna shipped with your product. PCEX-3G-HSPA, PCEX-3G-HSPA-A, PCEX-3G-CDMA-S, PCEX-3G-CDMA-V, PCEX-3G-CDMA-B, CISCO881G-A-K9, CISCO881G-S-K9, CISCO881G-V-K9 Step 7 Clean the flat surface to which you will affix the antenna. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-14 OL-16193-07