Cisco ATA-186 Administration Guide - Page 110

Optional Feature Parameters Chapter 5 Parameters and Defaults IPDialPlan Description This Iparameter allows for detection of IP-like destination address in DialPlan. Three values are valid: • 0-String is dialed as is and not treated as an IP address. • 1-When the Cisco ATA detects two asterisks (**), IPDialPlan takes over. The user enters the pound (#) key to terminate the digit collection, and the interdigit timeout default is not used. • 2-When IPDialPlan is set to 2, three asterisks (***) are required for IPDialPlan to take effect. All other values are currently undefined. Value Type Integer Range 0, 1 or 2 Default 1 Voice Configuration Menu Access Code 310 DialPlan Description The programmable dial plan is designed for the service provider to customize the behavior of the Cisco ATA for collecting and sending dialed digits. The dial plan allows the Cisco ATA user to specify the events that trigger the sending of dialed digits. These events include the following: • The termination character has been entered. • The specified dial string pattern has been accumulated. • The specified number of dialed digits has been accumulated. • The specified inter-digit timer has expired. Value Type Alphanumeric string Range Maximum number of characters is 199. Default *St4-|#St4-|911|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#.- Voice Configuration Menu Access Code 926 5-38 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP) OL-3410-01