Cisco ATA-186 Administration Guide - Page 98
FeatureTimer, Default, Voice Configuration Menu Access Code, Description, Value Type - disconnecting after minutes
View all Cisco ATA-186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Operating Parameters Chapter 5 Parameters and Defaults Default 0x00019e60 Voice Configuration Menu Access Code 316 FeatureTimer Description This parameter provides configurable timing values for various features, as shown below. • Bits 0-3-Maximum time to spend redialing if line is busy - Range: 0 - 15 - Factor: five-minute increments - Values: 0 - 75 minutes - Default: 0 (= 30 minutes) • Bits 4-7-Retry interval if line is busy - Range: 0 - 15 - Factor: 15-second increments - Values: 0 - 225 seconds - Default: 0 (= 15 seconds) • Bits 8-12-On-hook delay before a call is disconnected. This feature works only when the Cisco ATA is the terminating endpoint of the call. The user can hang up the phone in one room and pick up the phone in another room without disconnecting the line. - Range: 0 - 31 - Factor: five-second increments - Values: 0 - 155 seconds - Default: 0 (no delay) • Bits 13-15-Amount of time the Cisco ATA waits for a "486 Busy Here" response from a PSTN gateway after receiving a "183 Session Progress" response. - Range: 0 - 7 - Factor: one-second increments - Values: 0 to 7 seconds - Default: 0 (no waiting) • Bits 16-31-Reserved. Value Type Bitmap 5-26 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP) OL-3410-01