Cisco ATA-186 Administration Guide - Page 116

Optional Feature Parameters Chapter 5 Parameters and Defaults Recommended Values The following settings are recommended for the US: • DialTone = "2,31538,30831,3100,3885,1,0,0,1000" (approximately -10 dBm) • BusyTone = "2,30467,28959,1191,1513,0,4000,4000,0" (approximately -21 dBm) • ReorderTone = "2,30467,28959,1191,1513,0,2000,2000,0" (approximately -21 dBm) • RingBackTone = "2,30831,30467,1943,2111,0,16000,32000,0" (approximately -16 dBm) • CallWaitTone = "1,30831,0,5493,0,0,2400,2400,4800" (approximately -10 dBm) • AlertTone = "1,30467,0,5970,0,0,480,480,1920" (approximately -10 dBm) The following settings are recommended for Sweden: • DialTone = "1,30959,0,4253,0, 1, 0, 0,1500" (approximately -5 dBm) • BusyTone = "1,30959,0,2392,0, 0, 2000, 2000,0" (approximately -10 dBm) • ReorderTone = "1,30959,0,2392,0, 0, 2000, 6000,0" (approximately -10 dBm) • RingBackTone = "1,30959,0,2392,0, 0, 8000, 40000,0" (approximately -10 dBm) • CallWaitTone = "1,30959,0,2392,0, 0, 1600, 4000,11200" (approximately -10 dBm) • AlertTone = "1,30959,0,2392,0, 0, 480, 480,1920" (approximately -10 dBm) Specific Call-Progress Tone Parameter Information Brief descriptions, and lists of default values and the voice configuration menu code for each Cisco ATA tone parameter, are described in the following sections: • DialTone, page 5-44 • BusyTone, page 5-45 • ReorderTone, page 5-45 • RingbackTone, page 5-46 • CallWaitTone, page 5-46 • AlertTone, page 5-47 DialTone Description The Cisco ATA plays the dial tone when it is ready to accept the first digit of a remote address to make an outgoing call. Default values for the nine-integer array • ntone-2 • freq0-31538 • freq1-30831 • level0-1380 • level1-1740 • steady-1 5-44 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP) OL-3410-01