Cisco ATA-186 Administration Guide - Page 91

Chapter 5 Parameters and Defaults Operating Parameters NatTimer Description This parameter allows you to specify a retransmission interval for sending a dummy packet to NatServer. The interval is in seconds and is specified in bits 0-11 of this parameter. The upper 20 bits are reserved and should be set to 0. Value Type Bitmap Default 0, which means that no dummy packets will be sent to the NatServer. Voice Configuration Menu Access Code 208 Operating Parameters This section describes the following parameters, which are located in the green portion of the Cisco ATA Web Configuration Page: • LBRCodec, page 5-20 • AudioMode, page 5-20 • RxCodec, page 5-21 • TxCodec, page 5-22 • NumTxFrames, page 5-22 • CallFeatures, page 5-23 • PaidFeatures, page 5-24 • CallerIdMethod, page 5-25 • FeatureTimer, page 5-26 • Polarity, page 5-27 • ConnectMode, page 5-28 • AutMethod, page 5-30 • TimeZone, page 5-30 • NTPIP, page 5-30 • AltNTPIP, page 5-31 • DNS1IP, page 5-31 • DNS2IP, page 5-31 • UDPTOS, page 5-32 • SigTimer, page 5-32 • OpFlags, page 5-34 • VLANSetting, page 5-35 OL-3410-01 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP) 5-19