Cisco CP-7942G Administration Guide - Page 134
Firmware Versions Screen, Settings, Status.
View all Cisco CP-7942G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Status Menu Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone Table 7-3 Item Port 2 IPv4 Network Statistics Message Information (continued) Description Link state and connection of the Network port Information on the DHCP status. This includes the following states: • CDP BOUND • CDP INIT • DHCP BOUND • DHCP DISABLED • DHCP INIT • DHCP INVALID • DHCP REBINDING • DHCP REBOOT • DHCP RENEWING • DHCP REQUESTING • DHCP RESYNC • DHCP UNRECOGNIZED • DHCP WAITING COLDBOOT TIMEOUT • SET DHCP COLDBOOT • SET DHCP DISABLED • DISABLED DUPLICATE IP • SET DHCP FAST Firmware Versions Screen The Firmware Versions screen displays information about the firmware version that is running on the phone. Table 7-4 describes the information that is displayed on this screen. To display the Firmware Version screen, follow these steps: Procedure Step 1 Step 2 Step 3 Press the Settings button. Select Status. Select Firmware Versions. To exit the Firmware Version screen, press the Exit softkey. 7-10 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0 OL-15483-01