Cisco CP-7942G Administration Guide - Page 71

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Network Configuration Menu Table 4-1 Settings Configurable from the Phone (continued) Category TFTP settings Description Network Configuration Menu Option If you do not use DHCP to direct the phone to a TFTP server, you must manually assign a TFTP server. You can also assign an alternative TFTP server to use instead of the one assigned by DHCP. TFTP Server 1 Alternate TFTP TFTP Server 2 Related Topics • Displaying a Configuration Menu, page 4-2 • Unlocking and Locking Options, page 4-3 • Editing Values, page 4-3 • Network Configuration Menu, page 4-5 • Device Configuration Menu, page 4-11 Network Configuration Menu The Network Configuration menu provides options for viewing and making a variety of network settings. Table 4-2 and Table 4-3 describe these options and, where applicable, explains how to change them. For information about how to access the Network Configuration menu, see the "Displaying a Configuration Menu" section on page 4-2. Note The phone also has a Network Configuration menu that you access directly from the Settings menu. For information about the options on that menu, see the "Network Configuration Menu" section on page 4-24. Before you can change an option on this menu, you must unlock options as described in the "Unlocking and Locking Options" section on page 4-3. The Edit, Yes, or No softkeys for changing network configuration options appear only if options are unlocked. For information about the keys you can use to edit options, see the "Editing Values" section on page 4-3. Table 4-2 Network Configuration Menu Options Option IPv4 Configuration IPv6 Configuration Description To Change In the IPv4 Configuration menu, you can do the following: • Enable or disable the phone to use the IP address that is assign by the DHCP server. • Manually set the IP Address, Subnet Mask, Default Routers, DNS Server, and Alternate TFTP servers. 1. Unlock network configuration options. 2. Scroll to IPv4 Configuration and press the Select softkey. For more information on the IPv4 address fields, refer to Table 4-3. This menu setting is disabled in this release. OL-15483-01 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0 4-5