Cisco CP-7942G Administration Guide - Page 88
Ethernet Configuration Menu, Security Configuration Menu
View all Cisco CP-7942G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Ethernet Configuration Menu The Ethernet Configuration menu includes the options that are described in Table 4-15. Table 4-15 Ethernet Configuration Menu Option Option Span to PC Port Forwarding Delay Description To Change Indicates whether the phone will forward packets From Cisco Unified Communications Manager transmitted and received on the network port to the Administration, choose Device > Phone > Phone access port. Configuration. Enable this option if an application that requires monitoring of the phone's traffic is being run on the access port. These applications include monitoring and recording applications (common in call center environments) and network packet capture tools that are used for diagnostic purposes. Indicates whether the internal switch begins forwarding packets between the PC port and switched port on the phone when the phone becomes active. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. • When forwarding delay is set to disabled, the internal switch begins forwarding packets immediately. • When forwarding delay is set to enabled, the internal switch waits eight seconds before forwarding packets between the PC port and the switch port. Default is disabled. Security Configuration Menu The Security Configuration menu that you display from the Device Configuration menu displays settings that relate to security for the phone. Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For information about the security options on that menu, see the "Security Configuration Menu" section on page 4-27. Table 4-16 describes the options on the Security Configuration menu. Table 4-16 Security Configuration Menu Options Option PC Port Disabled Description To Change Indicates whether the access port on the phone is enabled (Yes) or disabled (No). Must be set to enabled for video support on the phone From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. 4-22 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0 OL-15483-01