Cisco CP-7942G Administration Guide - Page 58

Installing the Cisco Unified IP Phone Chapter 3 Setting Up the Cisco Unified IP Phone Table 3-1 Installing the Cisco Unified IP Phone 7962G and 7942G (continued) Task Purpose Related Topics 5. Connect a straight-through Ethernet cable from the See the "Network and Access Ports" section on page 3-2 switch to the network port labeled 10/100 SW on the for guidelines. Cisco Unified IP Phone 7962G and 7942G. Each Cisco Unified IP Phone ships with one Ethernet cable in the box. You can use either Category 3/5/5e cabling for 10-Mbps connections, but you must use Category 5/5e for 100 Mbps connections. 6. Connect a straight-through Ethernet cable from See the "Network and Access Ports" section on page 3-2 another network device, such as a desktop computer, for guidelines. to the access port labeled 10/100 PC port on the Cisco Unified IP Phone 7962G and 7942G. Optional. You can connect another network device later if you do not connect one now. You can use either Category 3/5/5e cabling for 10-Mbps connections, but you must use Category 5/5e for 100 Mbps connections. Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0 3-6 OL-15483-01