Cisco CP-7942G Administration Guide - Page 79
SIP General Configuration Menu, Device >, Device Settings > SIP Profile
View all Cisco CP-7942G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu SIP General Configuration Menu The SIP General Configuration menu displays information about the configurable SIP parameters on the phone. Table 4-7 describes the options in this menu. Table 4-7 SIP General Configuration Menu Options Option Preferred CODEC Out of Band DTMF Register with Proxy Register Expires Phone Label Enable VAD Start Media Port End Media Port NAT Enabled NAT Address Call Statistics Description To Change Displays the CODEC to use when a call is initiated. This Display only-cannot configure. value will always be set to none. Displays the configuration of the out-of-band signaling (for tone detection on the IP side of a gateway). The Cisco Unified IP phone (SIP) supports out-of-band signaling by using the AVT tone method. This value will always be set to avt. Display only-cannot configure. This value will always be set to Yes. Display only-cannot configure. Displays the amount of time, in seconds, after which a registration request expires. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Displays the text that is displayed on the top right status line of the LCD on the phone. This text is for end-user display only and has no effect on caller identification or messaging. This value will always be set to null. Display only-cannot configure. This value is set to No by default. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Displays the start Real-Time Transport Protocol (RTP) range for media. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Displays the end Real-Time Transport Protocol (RTP) range for media. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Displays if Network Address Translation (NAT) is enabled. This value will always be set to false. Display only-cannot configure. Displays the WAN IP address of the NAT or firewall server. This value will always be set to null. Display only-cannot configure. This value is set to No by default. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Related Topics • Displaying a Configuration Menu, page 4-2 • Device Configuration Menu, page 4-11 OL-15483-01 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0 4-13