Cisco CP-7942G Administration Guide - Page 95
Cisco Unified Communications Manager Security, Guide, Security Guide, Unlocking the CTL File
View all Cisco CP-7942G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Security Configuration Menu Table 4-20 CTL File Settings Option CTL File CAPF Server Unified CM/TFTP Server Description To Change Displays the MD5 hash of the CTL file that is installed in the phone. If security is configured for the phone, the CTL file installs automatically when the phone reboots or resets. For more information about this file, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. • A locked padlock icon in this option indicates that the CTL file is locked. • An unlocked padlock icon indicates that the CTL file is unlocked. IP address of the CAPF used by the phone. Also displays a certificate icon if a certificate is installed for this server. For more information about this server, refer to the "Using the Certificate Authority Proxy Function" section in Cisco Unified Communications Manager Security Guide. IP address of a Cisco Unified Communications Manager and TFTP server used by the phone. Also displays a certificate icon if a certificate is installed for this server. For information about changing these options, see the "Network Configuration Menu" section on page 4-5. If neither the primary TFTP (TFTP Server 1) server nor the backup TFTP server (TFTP Server 2) is listed in the CTL file, you must unlock the CTL file before you can save changes that you make to the TFTP Server 1 option or to the TFTP Server 2 option on the Network Configuration menu. Unlocking the CTL File To unlock the CTL file from the Security Configuration screen, follow these steps: Procedure Step 1 Press **# to unlock options on the Security Configuration menu. If you decide not to continue, press **# again to lock options on this menu. Note If a password is configured on the phone, you must enter a password after pressing **#. Step 2 Step 3 Highlight the CTL File option. Press the Unlock softkey to unlock the CTL file. After you change and save the applicable TFTP server option, the CTL file will be locked automatically. Note When you press the Unlock softkey, it changes to Lock. If you decide not to change the TFTP server option, press the Lock softkey to lock the CTL file. OL-15483-01 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0 4-29